Stand Or Base With a 3 Level Flower Pattern
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife makes very fancy boxes that are made out of large eggs (Ostrich, Emu) and needed stands for them. These would also work for other items that are going to be displayed and need a stand. Stands are 22mm and 30mm tall.
I used the normal print setting (0.20mm) on my AnkerMake 5M printer, 220C for all layers, bed temp 65C all layers, 5 top and 5 bottom solid layers, 5 perimeter layers, ESun PLA+ filament, 15% fill with Gyroid fill pattern, 1000mm speed across the board for print speed settings. No Skirt no Brim, Top and Bottom Fill - Concentric. Approximate printing time with the above settings 90 minutes.
Designed with TinkerCad. EMF and STL files attached to suit your needs.
Files subject to change at anytime.