KK12 Kalahari Khabu-compatible front panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A front display and bezel that are compatible with the KK12 Kalahari Khabu Biltong Boss
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Motivation
I broke the front panel of my KK12 Kalahari Khabu Biltong Boss box. I designed this compatible front panel, housing for the PCB, and bezel. The design replaces the self-tapping screws KK12 uses w/ M3x10-ish machine screws and heat set inserts.
Printing
Slicer settings
I used PLA, but if you're concerned about temps being too high, PETG should also work. The "ears" of the BarBody requires supports
Color settings
Every component of "BarBody" prefixed with "Main" should be the same (preferably dark) color , while components prefixed with "Text" should be a contrasting (lighter) color.
Additional BOM:
3 x M4 heat set inserts
for the bottom of the bezel
10 x M3 heat set inserts
for everywhere else
10 x M3-10 machine screws
slightly longer and slightly shorted are acceptable too
3 x M4 pan head Phillips machine screws
The original front plate uses these screws, just harvest those when taking the original front plate off
NOTE:
The tolerances are slightly off and I didn't want to reprint to fix them. I made everything fit by applying force (hammer) to various slightly-off features. The Fusion360 files are provided if someone else wants to adjust them parametrically.
I couldn't get my screwdriver into the tight spaces behind the bezel, so the bezel and the light-up bar are held by the 2 middle screws.
In the Fusion360 file, the Lid is facing the wrong way; the notch should be on the top side. However the Lid is symmetric, so I didn't bother rotating it. It will print just fine