1 / 6
Lawn Mower Gas Throttle Handle (e. g. for Toro, Solo, ALKO etc.) — image 1
1 / 6

Lawn Mower Gas Throttle Handle (e. g. for Toro, Solo, ALKO etc.)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement part for the handle used to control the gas Bowden cable in some older lawn mowers and other equipment

Rating
0 / 5
Likes
4
Downloads
11
Makes
0
Views
81
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The handle consists of two different parts held together by screws. It is designed to fit on a sheet metal control rod of 2.2 mm width (see image for an example).

Handle length: 70 mm
Diameter: 25 mm
Height: 56.5 mm

Required material:

  • 1 x Cylinder head screw (ISO 4762) M8 x 60 mm (hex drive)

  • 1 x Self locking nut (ISO 7040 or ISO 10511) M8

  • 2 x Flat-headed screw M4 x 12

  • 2 x Self locking nut M4

Printing:

  • Material: PETG (preferred), PLA may work too

  • Layer height: 0.24 mm

  • Infill: 30 %

  • If your printer can handle 45 degree overhangs: To increase strength and reduce support material use try to print the parts obliquely as shown in the slicer view image

  • Brim: As required by printing orientation

  • Supports: As required by printing orientation; recommended style: Organic/Tree, on buildplate

Tags