Rapidburner magnetic mount BD Pressure Advance Sensor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
That's a remix of the Rapidburner from chirpy2605. It's designed to fit in a BD Pressure Sensor.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 272
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
I remixed the original Rapidburner to fit in the bd pressure sensor from bdpressureE | Pandapi Print 3D
I also hated to unscrew the toolhead form the front and back if I wanted to check something on the hotend, so I added some magnets.
It's designed for Dragon UHF Hotends or Rapido UHF Hotends (62.5mm) with a G2 Wristwatch, Orbiter 2, Orbiter 1.5, WW BMG, Sherpa mini, LGX Lite, Sherpa micro extruder or similar mounting pattern.
The hold is amazing. I'm printing with 20k Accel and 500mm/s and the toolhead doesn't come off.
I recommend to print it in PET-CF and anneal the parts. ABS/ASA is fine but with the Phaetus Dragon UHF it may possible that the cooling ducts start to deform when you are printing above 270° with little to no part cooling.
With a rapido hotend this shouldn't be a problem since the heatblock is way smaller.
When glueing in the magnets you need to check that, when you put the parts together all the magnets are touching.
BOM
8 x 8x3mm Magnets
4 x 6x3mm Magnets
4 x M3 heatset inserts
4 x M3x8mm SHCS
2 x M3x14 SHCS
2 x M5 Washers
2 x M3 Washers (optional)
2 x M3x10 FHCS
2 x M2 heatset inserts (for the X Endstop)
2 x M2x10mm Screws (for the X Endstop)
TBD
I'm still working on a fully magnetic front cover. So that even the hotendfan connects via magents. This way it's easier to service hotend (unclogg etc.), and you may also use it as a trigger if the cover unexpectitly comes loose.
