1 / 5
Schnabel Kappe für Koziol Salto Vogel Seifenspender Verschluss — image 1
1 / 5

Schnabel Kappe für Koziol Salto Vogel Seifenspender Verschluss

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Beak Cap for Koziol Salto Bird Soap Dispenser

Rating
0 / 5
Likes
0
Downloads
7
Makes
0
Views
45
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

English description: see below.

Meine Bekannte hat diesen klassischen Seifenspender "Salto" von Koziol aus den 1990er Jahren. Leider war der Verschluss-Schnabel bereits ziemlich in Mitleidenschaft gezogen worden. 

Mit diesem Ersatzteil könnt ihr dem alten Vogel wieder neues Leben einhauchen! Damit es nicht länger heisst "Der Vogel ist tot!" (Danke, Monty Python).

Druck: Du solltest das Modell "über Kopf", auf der Schnabelspitze drucken. Um die Betthaftung zu gewährleisten, muss im Slicer ein "Brim" hinzugefügt werden (siehe Bild).
Falls das Objekt mit der weiten öffnung nach unten gedruckt wird, muss auf der Innenseite mit Support gearbeitet werden.
Verwendetes Filament: Das Filament, PLA, "Reinorange", Nr. F10694


English Version:

My friend owns this classic “Salto” soap dispenser by German manufacturer Koziol, from the 1990s. Unfortunately, the spout/cap was already in pretty bad shape.

With this replacement part, you can bring the old bird back to life! So it no longer has to be “The parrot is dead!” (thanks, Monty Python).

Printing: You should print the model "upside down," standing on the tip of the beak. To ensure proper bed adhesion, you need to add a brim in your slicer (see picture).

If you print the object with the wide opening facing down, you will need to use support structures on the inside.

Filament used: German shop "Das Filament", PLA, "Reinorange" F10694

Tags