AIRSOFT- Ops Inc-style Suppressor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Airsoft suppressor inspired by the Ops Inc/Allen Engineering AEM3
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 52
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
AIRSOFT ONLY
Based on the Ops Inc AR/M4 suppressors
Comes in two attachment styles. First is a direct thread mount with an alignment collar that fits with a front sight block. Second is a collar mount. Suppressor body is split to have a threaded end cap to make printing easier.
Both suppressors are compatible with tracers. The direct thread suppressor supports tracers 28mm in diameter and up to 95mm in length. Foam or any other spacer material will be needed for tracers less than 95mm in length.
Collar mount suppressor supports tracers 30mm in diameter and up to 150mm in length.
Only hardware needed is 2x M3x12mm bolts.