Dog gate clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This part is designed to clip onto the side of a wire dog playpen so it can be attached to a surface. I removed the…
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 57
- Makes
- 3
- Views
- 545
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution
This part is designed to clip onto the side of a wire dog playpen so it can be attached to a surface. I removed the clips joining the foldable metal pen sections, so it could block access to a wide entry way. The pen's wire has an approximate diameter of 3.7mm.
I snapped the printed parts onto the wire, then attached them to the wall with high strength velcro. The gap in the middle is for a small zip-tie, in case it needed a more robust connection to the wire.
If the length of the wire gate is too long, it's becomes pretty easy to knock over.
Print Settings
Notes:
I printed this part vertically in order increase strength. Scale the part as needed, depending on the diameter of the wire and the accuracy of your printer.
Category: Pets