Dog gate clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part is designed to clip onto the side of a wire dog playpen so it can be attached to a surface. I removed the…
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 57
- Wydruki
- 3
- Wyświetlenia
- 545
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
This part is designed to clip onto the side of a wire dog playpen so it can be attached to a surface. I removed the clips joining the foldable metal pen sections, so it could block access to a wide entry way. The pen's wire has an approximate diameter of 3.7mm.
I snapped the printed parts onto the wire, then attached them to the wall with high strength velcro. The gap in the middle is for a small zip-tie, in case it needed a more robust connection to the wire.
If the length of the wire gate is too long, it's becomes pretty easy to knock over.
Print Settings
Notes:
I printed this part vertically in order increase strength. Scale the part as needed, depending on the diameter of the wire and the accuracy of your printer.
Category: Pets