Power XL 345 Filaments Loader for Prusa XL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
electric filament loader for Prusa XL powered by the printer (variable number of filaments 3 4 5 ) - works with flexible
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 23
- Makes
- 0
- Views
- 1,110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Standard Digital File License
Prusa XL needs an filament loader. This model is powered by Prusa XL printer power source (24V), is easy to print (no supports, 0 infill), install and it works even with flexible!
Videos
Bill of materials
PETG filament
2 ring terminals (ID 5mm) - https://s.click.aliexpress.com/e/_c3hCoQtF
blade terminals (male and female 2.8mm) - https://s.click.aliexpress.com/e/_c3dhSVUf
3 M3x12 screws
one T spring nut M3 for 3030 - https://a.aliexpress.com/_Eyj33i0 or a 3d printed nut for 3030 for M3 screws
optional M3x6 headless screws (one for each filament) https://www.aliexpress.com/item/32865464785.html
JGB37-520 Motor 24V - 600 RPM - https://s.click.aliexpress.com/e/_c3jJHTJV
Aluminium/steel 5mm OD bar - https://s.click.aliexpress.com/e/_c2Js8XxV (optional, can be 3D printed)
6mm to 5mm coupling connector - https://s.click.aliexpress.com/e/_c35DHFSF
5 mm ID, MK7 MK8 Extruder Drive Gear 40 teeth (one for each filament) - https://s.click.aliexpress.com/e/_c33SBYob
at least one M3x45 screw for 3 filament version (55mm for four filaments; 65mm for five filaments) - https://www.aliexpress.com/item/32810872544.html
one MR115-2RS Ball bearing 5x11x4mm - https://s.click.aliexpress.com/e/_c3MF7zF5
683ZZ 3x7x3 ball bearings (one for each filament) - https://s.click.aliexpress.com/e/_c3v5cbf9
16 mm lever microswitch KW11-3Z (one for each filament) - https://s.click.aliexpress.com/e/_c4F8QI9z
PTFE tube
PC4-M6 Pneumatic connectors (one for each filament) - https://s.click.aliexpress.com/e/_c4bxe3qF
Printing
Open the 3 filaments as project the 3mf file with PrusaSlicer. No supports or infill needed.
If you want 4 or 5 filaments the files from the 4/5 filaments folder. The motor case the key files are the same.
Assembly and install
Install a 683ZZ bearing in the key. Use an M3x6 headless screw to secure it or a printed pin (included)

Optional: paint the ends:

Insert some PTFE tube (32 mm), trim it then insert a PC3-M6 connector


The first of the three keys is ready.
Cut the bridges then install three switches:


Put an M3x12 screw:

Install the motor:


Cut a 65 mm rod (or print the 65mm plastic shaft) and put the 6mm-5mm coupling connector, then three extruder drive gears, then MR115-2RS Ball bearing.

Connect the motor to the body using 2 M3x12 screws:

Remove the plastic of the ends the wire (3 cm) then solder them.


Cut the wires, drive the throw the hole the the motor and crimp them using:
for the wires the connect to printer power source (32 cm): two ring terminals and 2.8 two female connectors
for the switch wires (15 cm): one female 2.8 connector and and 2.8 male connector

Connect the ring wires to the Prusa XL power source:

Install the device on the side frame, after inserting T spring nut M3 for 3030 then screw in the M3 screw (after raising the gears shaft):

Connect the wires to the motor:

Install the keys and secure them with a M3x45 screw on the left. As a safety pin, the keys can be blocked using the Prusa M3 metal bar or an M3x45 screw


Early prototypes

This model is not meant to be used with the side filament sensor (I don't use it). The following models work with the side filament sensors: