1 / 3
Longshot from Ocarina of Time — image 1
1 / 3

Longshot from Ocarina of Time

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed the Hookshot by making it a bit longer. It now fits 3 chain rings.

Rating
0 / 5
Likes
4
Downloads
17
Makes
0
Views
183
Reviews
0

Updated at source:

Model information

Category
Props
License
Creative Commons — Attribution — Noncommercial

Extended the barrel to fit an extra ring of chains.

Also made a sleeve to serve as a background to the chains. The sleeve prints in vase mode. It is a tight fit but it has to be so that the chains still fit around the barrel.

The connector block is 14.5 x 14.5 x 19, and I made a negative volume on the Body2 part that is 15 x 15 x 10 so there is plenty of tolerance. I used hot glue to put the longshot together and the glue just fills in the space when you squish it all together. 

I'm also uploading a Body3 part with the same negative volume.

I had to upload .3mf files because PrusaSlicer can't export .stl files with negative volumes.

Tags