Longshot from Ocarina of Time
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the Hookshot by making it a bit longer. It now fits 3 chain rings.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
Extended the barrel to fit an extra ring of chains.
Also made a sleeve to serve as a background to the chains. The sleeve prints in vase mode. It is a tight fit but it has to be so that the chains still fit around the barrel.
The connector block is 14.5 x 14.5 x 19, and I made a negative volume on the Body2 part that is 15 x 15 x 10 so there is plenty of tolerance. I used hot glue to put the longshot together and the glue just fills in the space when you squish it all together.
I'm also uploading a Body3 part with the same negative volume.
I had to upload .3mf files because PrusaSlicer can't export .stl files with negative volumes.