15x16cm Nano Aquarium Lid + Suspended Sponge filter (Shrimp / Fish tank) + Plant Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a lid for a generic 15cm x 16xm aquarium, the suspended filter leaves more space for shrimp to graze.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 294
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought this nano aqaurium for R100 (6$) here and I'm working on a budget shrimp tank,
My Sponge Filter is a Boyu - SF 100, but it should work for any filter with a 15mm bubble shaft
use 6mm airline tubing to seal and prevent bubbling through the top. (I've never had this happen, I designed it to be as air tight as possible with the tubing I have, but should work for most.)
There is also space for a small LED Strip, I pulled a usb LED strip circuit out of a cheap LED lamp. Which can be secured by either M2 screws or a filament piece. Print the shade in clear PLA / PETG with 2 bottom layers / use a waterproof LED Strip.
Print the bubble shaft in Clear PLA / PETG as majority of clear filaments lack toxins from colorants that can seep into the water.
I included the bubble shaft thread test piece in case you have a lid of your own and just want to add the suspended filter
The hole in the top of the lid is to secure a net cup for aquaponic plants,
The system really just frees up a lot of space in the tank, Im going to further improve it to have a case for a mini USB Air Pump, and essentially have a DIY All in One Nano tank
