Quick Change Laser Plate Holder SM 2.0 A350
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
English below Support pour échange rapide du plateau Laser de la SnapMaker 2.0 A350. Il faut imprimer 2 plaques J’ai…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 104
- Makes
- 0
- Views
- 998
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
English below
Support pour échange rapide du plateau Laser de la SnapMaker 2.0 A350.
Il faut imprimer 2 plaques
J’ai utilisé 4 aimants de Diamètre 15mm et d’épaisseur 4mm.
8 Noyaux M4x4x6
8 Vis M4x6
Temps 10h55mn Chaque Plaque
Holder for quick exchange of the laser tray of the SnapMaker 2.0 A350.
You need to print 2 plates
I used 4 magnets of Diameter 15mm and thickness 4mm.
8 cores M4x4x6
8 Screws M4x6
Time 10h55mn each plate.
Print Settings
Printer:
SnapMaker 2.0 A350
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament:
Eryone PETG
Grey Post-Printing =============
English below
- Pour les noyaux, s’il sont un peu dur à entrer, chauffer légèrement la partie métallique.
- Attention à bien mettre les 4 éléments en métal du plateau laser dans le bon sens avant de les visser.
- For cores, if they are a little hard to enter, slightly heat the metal part.
- Be careful to put the 4 metal parts of the laser plate in the right direction before screwing them in.
Category: 3D Printer Accessories