Tacx Spider Team T3050 Thru Axle Adapter (12x100mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printed adapter to mount modern 12x100mm thru-axle bikes on the Tacx Spider Team T3050. No extra parts required.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description: Breathe new life into your classic Tacx Spider Team T3050 workstand! This adapter allows you to mount modern road bikes and gravel bikes with 12x100mm front thru-axles.
Unlike other adapters, this design does not require you to buy extra metal pipes. Instead, it reuses the massive original Tacx plastic block for maximum stability.
How it works:
Take the original Tacx mounting block (I recommend using the rear wheel mount, as it's rarely used).
Use a hammer and a socket wrench to carefully knock out the original 25mm metal quick-release bushing.
Press this 3D-printed inlay into the empty plastic block. It features a 25mm outer diameter for a snug friction fit.
The inlay is exactly 100mm wide and simulates your front hub. Just put your fork on it and secure it using your bike's original 12mm thru-axle!
Print Settings:
Material: PETG (highly recommended for strength and slight flexibility)
Orientation: Print vertically (standing up) to ensure a perfectly round 12mm hole.
Walls/Perimeters: 5 walls for maximum clamping strength.
Infill: 25% Gyroid or Cubic.
Adhesion: Use a Brim! It's a tall and narrow print.
Note: The inner hole is modeled at exactly 12.3mm. Depending on your printer's tolerances, you might need to run a piece of sandpaper through the hole a few times for a buttery smooth fit of your greased thru-axle.
