Mounting Bracket for Original 15-key StreamDeck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the back cover of the original StreamDeck with a bracket that has heat-set threaded inserts.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The case of the 15-key StreamDeck has no mounting holes. This replaces the back of the case with a bracket that has heat-set threaded inserts. Allows mounting in a larger enclosure while retaining the original front fascia plate.
Compatibility
Designed for and works with the original 15-button StreamDeck.
Does NOT work with the MkII (USB-C) version.
Mounting Methods
Recommended: 4x 2.5mm heat-set inserts
Alternative: use screws in the inner holes from inside the bracket to your enclosure before clipping in the StreamDeck (no heat-set inserts required).
Mounting Hole Placement
Heat-set Inserts: 105.2 x 64mm
Inner Screw Holes: 105.2 x 42mm
Print Settings
PLA/PETG/ABS should all work fine (I used PLA)
No supports needed