Mounting Bracket for Original 15-key StreamDeck
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the back cover of the original StreamDeck with a bracket that has heat-set threaded inserts.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The case of the 15-key StreamDeck has no mounting holes. This replaces the back of the case with a bracket that has heat-set threaded inserts. Allows mounting in a larger enclosure while retaining the original front fascia plate.
Compatibility
Designed for and works with the original 15-button StreamDeck.
Does NOT work with the MkII (USB-C) version.
Mounting Methods
Recommended: 4x 2.5mm heat-set inserts
Alternative: use screws in the inner holes from inside the bracket to your enclosure before clipping in the StreamDeck (no heat-set inserts required).
Mounting Hole Placement
Heat-set Inserts: 105.2 x 64mm
Inner Screw Holes: 105.2 x 42mm
Print Settings
PLA/PETG/ABS should all work fine (I used PLA)
No supports needed