1 / 11
OnStep ST4 Handheld controller
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
OnStep Handheld ST4 controller for astronomy telescope with Goto system by Howard Dutton project. FreeCAD sources on…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 871
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v2.0
OnStep Handheld ST4 controller for astronomy telescope with Goto system by Howard Dutton project.
FreeCAD sources on GitHub
Other componets:
- 1x Universal DIY Double Side Prototype PCB Board Tinned FR4 Breadboard 5x7cm
- 4x Tactile Switch Tact Push Button Momentary and Colour Round Cap
- 2x 2 Position DPDT 2P2T Panel Mount Vertical Slide Switch 6 Pin
- 1x RJ45 Network Ethernet 8P8C Female Socket Connector 8Pin
- 8x Self Tapping Screw 2x6
Another recommended link:
- My OnStep Controller Box for on Arduino Mega2560 board
- OnStep SHC (Smart Hand Controller)
- OnStep for SEBEN EQ3 mount
- 3D printed - Small Travel EQ telescope mount 2019
Print Settings
Supports:
No
Infill:
50%
Notes:
ABS or PLA 1.75mm Filament
Category: DIY