1 / 3
Malé čelisti pro sklíčidlo ONEWAY TALON — image 1
1 / 3

Malé čelisti pro sklíčidlo ONEWAY TALON

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Malé čelisti pro sklíčidlo ONEWAY TALON - Small jaws for ONEWAY TALON chuck

Rating
0 / 5
Likes
2
Downloads
6
Makes
0
Views
87
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Čelisti standardně dodávané se sklíčidlem ONEWAY TALON mají minimální průměr vnějšího upnutí okolo 40 mm. Pro menší obrobky lze použít tyto čelisti. Samozřejmě s rozumem a citem, je to plast, tak jen pro lehké kousky. Jak šrouby čelistí, tak samotné sklíčidlo utahujte s citem, ať to drží, ale ať čelisti neprasknou. AI chytrák mi doporučil ASA jako materiál s nejvhodnějším mixem vlastností.
Tisknětě v poloze dle fotky.

The jaws supplied as standard with the ONEWAY TALON chuck have a minimum external clamping diameter of around 40 mm. These 3D printed jaws can be used for smaller workpieces. Of course, with common sense and sensitivity, it is plastic, so only for light pieces. Tighten both the jaw screws and the chuck itself with sensitivity, so that it holds, but so that the jaws do not crack. AI recommended ASA to me as a material with the most suitable mix of properties.

Tags