Brother MFC9330CDW ADF Paper Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement paper tray for the document feeder on the Brother MFC9330CDW.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This model requires 4 M3x8mm screws for assembly and optionally M3 heat set inserts.
Choose a hinge type that you want to use and print two, they should not need any supports.
Print the left and right plates and glue them together with the holes away from each other. Generic superglue works fine.
(Optional) Install heat set inserts.
Assemble the hinges to the plate using M3 x 8mm screws. Leave one screw out for now so that the hinge can swivel.
Install the tray onto the printer, swiveling the hinge with the single screw into the tray pin and install the last screw.