1 / 3
Shower Hose Connector Nipple — Villeroy & Boch / Gustavsberg Thermostatic Valve (M20x1.5 → G1/2") replacement — image 1
1 / 3

Shower Hose Connector Nipple — Villeroy & Boch / Gustavsberg Thermostatic Valve (M20x1.5 → G1/2") replacement

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

M20x1.5 → G1/2" shower hose nipple for Villeroy & Boch / Gustavsberg thermostat valve. Print PCTG.

Rating
0 / 5
Likes
6
Downloads
25
Makes
0
Views
240
Reviews
0

Updated at source:

Model information

Category
Bathroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement for the OEM grey plastic connecting nipple that sits between a Villeroy & Boch (or Gustavsberg) thermostatic shower bar valve body and the shower hose.

The original part is a small grey plastic piece that can crack. The official brass replacement exists but is hard to find and costs ~8–60€ depending on where you source it. This print gets you back in the shower same day.

SPECS

  • Top: M20×1.5 external thread + O-ring groove (screws into valve body)

  • Bottom: G1/2" external thread (shower hose connects here)

  • Total height: ~19mm (matches OEM plastic part)

  • OEM part numbers: GB41634757 01 (Gustavsberg), 178787 (Oras), 92517800 (Villeroy & Boch)

  • OEM EAN: 7393792210034

PRINT SETTINGS

  • Printed on: Centauri Carbon

  • Material: PCTG recommended — good heat/chemical resistance for hot water under pressure. PETG may work short-term. Do NOT use PLA.

  • Walls: 5+ perimeters

  • Infill: 100%

  • Reuse the original O-ring. If you need a replacement, use a standard NBR O-ring with OD ≤22mm and 1.5–2mm thickness (e.g. 20×2mm or 19×2mm — available at any hardware store).