BTTEddy Creality K1 & K1C variable height mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a variable height BTTeddy/duo mount to accommodate large variety of nozzle / hotend stack height.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 23
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
K1 Variable Height Mount (Remix of anavrin72)
This is a remix of the excellent model by anavrin72, updated with several quality-of-life improvements and better adjustability for the K1 platform.
Key Changes:
Relocated Mounting Point: Moved from the rear carriage to the fan screw for better stability and easier access.
Improved Cable Management: Integrated new cutout slots for easy wire routing.
Variable Height Adjustment: Added a vertical adjustment range to accommodate various nozzle and hotend stack heights.
Calibration : This mount allows you to precisely dial in your offset to get the Regular and Tap functions working perfectly. It successfully auto-calibrated both the regular drive and tap current at 16. If you need a bit more overhead, you can safely push the tap current to 17.
Note: If you are having trouble getting your Tap dialed in, try adjusting the physical height of the mount slightly and re-calibrating.
Compatibility & Testing
I have verified this mount on two separate K1 printers. It is designed to work seamlessly with:
Hotends: Optimized for the CHCB-OT hotend.
Nozzles: Tested across a wide variety of stack heights, including Bondtech CHT MK8, Bimetallic, and standard Brass nozzles.
Required Hardware
1x M3 x 10 Screw
1x M3 Washer
Recommended Printer Settings:
x_offset: -20.0
y_offset: 10.0
mesh_min: 15, 15
mesh_max: 200, 200