Button Only Cover for Nest Hello
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.75 – €3.37 net (excluding VAT)
For file: nestCover_0.3mm_PLA_MK3S_2h27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.06 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 2.45 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Cover for Nest Hello doorbell that can be installed to cover the button but leave the camera or stored on the unit.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A few too many delivery men woke our napping baby with a "your package is delivered" buzz. I know there's a SILENCE feature in the app but my wife wanted something we could flip at the start of the weekend and leave up without her having to download the app or remember to set it.
I printed in PLA since we're only planning on using it about a year and it's held up for at least three months so far. Normally for anything outdoor I recommend PETG or better but, hey, I can compost the PLA in my county so I default to that.
That said, you can see the pretty aggressive unsupported edges. Tolerances on the doorbell are not so tight that those are necessary so feel free to use supports or not like I did. As with all my models that are "good enough" but not perfect I've included all the dev files for you to improve or modify. Text was added at the slicer level so you can remove/modify that with the 3mf or just import the step and it'll be blank.
Thanks to @e.nygren for doing the original because the mod in Fusion was to split the halves, rotate the privacy, extend it past the button, then add a hole for the camera. I didn't have to measure a thing thanks to them so I appreciate it.