Button Only Cover for Nest Hello
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for Nest Hello doorbell that can be installed to cover the button but leave the camera or stored on the unit.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A few too many delivery men woke our napping baby with a "your package is delivered" buzz. I know there's a SILENCE feature in the app but my wife wanted something we could flip at the start of the weekend and leave up without her having to download the app or remember to set it.
I printed in PLA since we're only planning on using it about a year and it's held up for at least three months so far. Normally for anything outdoor I recommend PETG or better but, hey, I can compost the PLA in my county so I default to that.
That said, you can see the pretty aggressive unsupported edges. Tolerances on the doorbell are not so tight that those are necessary so feel free to use supports or not like I did. As with all my models that are "good enough" but not perfect I've included all the dev files for you to improve or modify. Text was added at the slicer level so you can remove/modify that with the 3mf or just import the step and it'll be blank.
Thanks to @e.nygren for doing the original because the mod in Fusion was to split the halves, rotate the privacy, extend it past the button, then add a hole for the camera. I didn't have to measure a thing thanks to them so I appreciate it.