Ender 5 Plus/Mercury One.1 Z Chain Mounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Z Cable chain mounts to Suit the Ender 5 Plus or Mercury One.1
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 18
- Makes
- 0
- Views
- 144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Just a couple of cable chain mounts I whipped up for the Ender 5 Plus Z axis to use a 10x15 R18 style cable chain.
These were heavily inspired by @MandicReally but I found I preferred having the cable chain brace up against the rear 2040 extrusion, allowing it to terminate in the stick holes in the Mercury One.1 Electronics enclose deck.
There's a left and right version (just mirrored) depending on which side you want to use.
BOM:
- 6x M3x4x5 brass heatset inserts
- 3x FHCS M3x5 screws for the chain
- 3x SHCS M3x10 screws for the bracket
- (maybe) some gaff tape to shim out the linear bearing depending on your print tolerances.
I used these cable chains: https://www.amazon.com.au/dp/B0BKQR11HL