Ender 5 Plus/Mercury One.1 Z Chain Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Z Cable chain mounts to Suit the Ender 5 Plus or Mercury One.1
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Just a couple of cable chain mounts I whipped up for the Ender 5 Plus Z axis to use a 10x15 R18 style cable chain.
These were heavily inspired by @MandicReally but I found I preferred having the cable chain brace up against the rear 2040 extrusion, allowing it to terminate in the stick holes in the Mercury One.1 Electronics enclose deck.
There's a left and right version (just mirrored) depending on which side you want to use.
BOM:
- 6x M3x4x5 brass heatset inserts
- 3x FHCS M3x5 screws for the chain
- 3x SHCS M3x10 screws for the bracket
- (maybe) some gaff tape to shim out the linear bearing depending on your print tolerances.
I used these cable chains: https://www.amazon.com.au/dp/B0BKQR11HL