19mm Bora Compatible Corner Clamp MFT Style
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a corner bracket for the Bora mft style tables for the centipede system.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a corner bracket for the Bora mft style tables for the centipede system. The fit is solid, but not too tight (18.8mm pegs), so there is just a slight bit of play that makes it easy to take out. For a more solid fit, you could consider going to 18.9mm, or even 19mm directly, but I see no advantage to that given how it's used. I applied a LOT of pressure to it with a horizontal clamp and it showed no signs of deflection or buckling. Printed originally in PLA+ filament, but is could for basically any type. PETG would be good but honestly, I haven't yet found the breaking point in regular use for the PLA+, which seems to be plenty strong in a hobbyist workshop setting. I couldn't find any other prints of something like this specifically for the Bora.