19mm Bora Compatible Corner Clamp MFT Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a corner bracket for the Bora mft style tables for the centipede system.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a corner bracket for the Bora mft style tables for the centipede system. The fit is solid, but not too tight (18.8mm pegs), so there is just a slight bit of play that makes it easy to take out. For a more solid fit, you could consider going to 18.9mm, or even 19mm directly, but I see no advantage to that given how it's used. I applied a LOT of pressure to it with a horizontal clamp and it showed no signs of deflection or buckling. Printed originally in PLA+ filament, but is could for basically any type. PETG would be good but honestly, I haven't yet found the breaking point in regular use for the PLA+, which seems to be plenty strong in a hobbyist workshop setting. I couldn't find any other prints of something like this specifically for the Bora.