1 / 1
Wall mount for pole mount ubiquity UISP devices
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
wall mount for AirMAX LiteBeam 5ACs
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
We needed a wall mount for some AirMAX LiteBeam 5ACs. Supports are required for the top portion. Printing the object with a 0.6mm nozzle is ideal, as the layer lines let the LiteBeam mount bite in nicely. A higher infill density is recommended for strength. PETG is highly recommended.
We have a dozen or so of these out in the field, one pair currently for three years, even surviving harsh winter and windy conditions. It should work with many pole mount devices that have enough clearance.