MATX 2U DeskPi Rackmate T2 Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tray to hold a MATX motherboard in a DeskPi Rackmate T2 10 inch rack
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 52
- Makes
- 0
- Views
- 336
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
WILL PROBABLY NOT WORK ON OTHER RACKS OTHER THAN THE RACKMATE T2 UNLESS YOUR SPACING BETWEEN BACK AND FRONT IS 10 1/4 INCHES OR 260.35MM
PCIE CARDS WILL NOT FIT WITH BRACKET INSTALLED
V1: Release
V2: Changed back cutout to not block motherboard IO
A tray to hold a MATX motherboard in a DeskPi Rackmate T2 10 inch rack.
Fits snug into the rack, you need quite a lot of room to put it in on an angle so I would put this in first before anything else. There is just enough clearance on the side walls to put the power supply under and feed the cables up. I had to modify my motherboard and remove the VGA port using a hot air rework station because it protruded to far out in the corner. On the front there is a 16mm hole for a power button.