BMW F10/F11 Fuel Cap Cable / Cord / Hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement for the rubber cable holding the fuel cap of a BMW F11. It might also fit to other BMW cars.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 58
- Makes
- 0
- Views
- 211
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This fits a BMW F11 and maybe also other BMW cars from around 2015.
If the old cable brakes, this is a replacement of the ring at the cap and the cable. The original ring has to be removed from the fuel cap. Be careful not to brake anything else then the turning ring. Use side cutting pliers or a similar tool. The put the new ring onto the fuel cap.
If the ring does not fit you can also adjust the width in the attached model and re-export.
I used TPU 95 for the print. Nozzle diameter can be 0.25 - 0.4, all work.
I printed with supports but this leaves a rough finish. This also leads to the fact, that the ring does not slide as good as the original one. But overall it works.
Don't forget to like if you like.