Counting matching models…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
A box for the Wolfbox MF100 air duster and all of its accessories. Includes a notch in side of box to charge while in the box. I left it text free - emboss whatever text you might want on the lid using the slicer :) The hinges/latches…
First German addition to the wallart series featuring Bf109. Main enemy of the Spitfire you can find on my profile. Once again simple one-piece print to decorate your workshop, office, locker at work etc.
First German addition to the wallart series featuring Bf109. Main enemy of the Spitfire you can find on my profile. Once again simple, precut print to decorate your workshop, office etc. original size maxes out the Mk3s print bed, but can…
1956 Ford F100 Pickup - Stylized 3D Print This is a high-quality 3D printable model of the iconic 1956 Ford F100 Pickup . Designed with a clean, stylized look, it’s a perfect project for classic car enthusiasts and makers alike. Key…
A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…
Print at 0.15mm layer height. Models should be in correct orientation for printing. Tolerance at mounting point is 0.10mm on either side which makes for a snug fit. If your printer isn't very good at dimensional accuracy, you may need to…
I bought a Nikon F3 SLR camera that was missing the flash PC sync terminal cap. I modeled this one as a replacement. It is compatible with other Nikon cameras such as the F F2 F3 F4 F5 FA FG FE2 FM2 F100. I recommend printing with the…
i saw the bell polymaker made and couldn't find the file so i made one myself. its a 2 piece print in place. 100mm bell about 210mm high assembled. bell portion is meant to be printed in pps for the ringing property and the handle can be…
bmw m5 f10 535i 2d stand model car
Update: Pre-cut vinyl stickers for the tires availble! https://www.thingiverse.com/make:1095612 In addition of Boyson-IPL's OpenRC F1 2022 remix, I designed Tamiya F104 compatible rims that look like the 18 inch wheel aero covers from the…
rotated the honeycomb pattern to make it easier to print
This is the EMF100 file from planet eclipse modified to have no feedneck option, a shorter frame, and full railing across the top. Made easy for mods. I printed my version in carbon fiber filament, Super light weight and it has lasted a…
One of the main failure points of a BMW 3 Series GT is the throttle body, specifically the nylon gear within the throttle body that can break off causing the throttle flap to be in a stuck open or non functional position. This gear can be…
Nikko F10 Frame Buggy Rear Tires. These fit 1/10 Scale Buggies like the Nikko Rhino Bison Thunder Bolt, Sears Super Lobo II, Radio Shack Golden Arrow, etc. Fit Wheel / Rim size: 50mm Diameter x 35mm Wide The tire is about 85mm Total…
I needed a way to store my wolfbox duster laying sideways so it would fit in the tool chest. Drew this little guy up in F360 to get the job done. 4x4 base and 10U high.
I remixed the “OpenRC F1 2023 Car - Full Part Set”, I remade the tires to be the same size as the Tamiya F104 tires Print files Front_Tire_V1 Rear_Tire_V1 Print settings Printed on my prusa mk4 Printed with Input Shaper (structural)…
A gridfinity bin to hold the MF100 air duster and all accessories!
OpenRC F1 - 2017 style wheels that fit Tamiya F104 tires. Package also includes the outer thrust plate that is compatible with the Ball Diff found at ( https://www.thingiverse.com/thing:3085455 ) In the spirit of OpenRC, STEP files are…
This is a redesign of my original Note 20 Ultra phone holder with a tough armor spigen case to accomodate my new phone the Samsung S22 ultra with the same case. I have made the design with a lower height and overall smaller frame. For my…
The old Audi / Auto Union Odometers are known to fail, while the speedometer is still working fine. The reason for that is a white plastic gear in the odometer, spltting/cracking and slipping on the shaft that turns the digits. This…
The printed ones on ebay have gotten quite expensive. This is intended as a cheap (temporary-ish) fix to get your walkman powered quickly. It was printed with no support or brim. 2mm layer height. PLA only so far. - Does not Fit Sony…
BMW F10 Differential Bushing Insert. Print at 100% infill, I used TPU 95a durometer but can also use PA-CF or any other hard material. This is inserted into the bushing to stiffen it.
escala 1:43 usar ejes metalicos 2mm,,,, clip escolar n8
What problem does this solve you asked? Stepper motor shafts/bearings aren't designed to take axial load, but only radial load, so taking the whole weight of the gantry isn't their forte, they will wear down the bearings faster, create…
Since I lost two of my backseats isofix covers, I redraw them. Maybe someone else need them as well. I printed them with a 0,2mm nozzle, fuzzy skin at the frontside (strenght 0,04mm / distance 0,1mm), and forced support for the first…
I had an Anker PowerWave wireless charger A2503 lying around that I didn't need. That's why I developed this phone holder for my BMW F11 and Samsung S20 Plus in a Spigen Tough Armor case. I like the inductive charging. So the wireless…
I found this great template and decided to make a holder for my duster. Pretty basic but seems to work.
I printed in pla 0.3 layers i removed infill from the “front” of the “wings” so it'll be more “snappy” required atleast 1 multiconnect connector (2 recommended)
This is a custom design! It is meant to replace the original using the original hardware. It should fit, but it is different than the original. It is thicker, and should be a better 3D Printed part than if I had tried to make an exact…
News, 28.03.2020: I have now added three version of the Extrudermount, the recent one is the one with BMG in the title, and was designed around a BMG clone extruder, but should fit regular BMGs as well. Also added the missing…
Print with the out side face of the wheel down with support for the outer tire lip and center face only. Wheel face grove doesn't need support. 15% infill is plenty with 3 or 2 wall loops.
I found the vacuum connection too close to the surface, and not efficiency enough. There was an way to get all the dust more efficient Print instructions Printed in 0.2 mm layer in PETG, no supports needed
This set of models will allow you to mount this 5-port switch vertically (flat) against a wall using household fasteners. The first model is for hanging the switch body. This is a snug fit, but does not cover the front ports. This allows…
1962 Ford F100 Unibody, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for…
A slightly larger D10 part for Tamiya F103 to accommodate stardard 2S lipo batteries.
Messerschmitt Bf109 Wall Art Silhouette model. Adjustable size. I accept model suggestions. If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life:…
Scale Messerschmitt Me109 tyres with 90mm outside diameter.
Best printed in ASA or ABS. Fits perfectly for the CRF1000L. Also needed: x4 M5 Nylock Nuts (DIN985) x4 M5x16 Screws (DIN912) x1 M4x12 Screw with shallow head (DIN7984) 03-Jun-2025: Updated model with a slightly smaller hole for the…
I designed this for my right hand drive F10/F11 to hold and charge my Note 20 Ultra with a spigen case. Added off-centre ones because they come very close to the centre console trim also added an off-centre LHD version Uploaded a shorter…
LMP style rotary encoder caps for the Thrustmaster SF1000
Ce modèle est complété par celui-ci qui est paramétrique donc plus facile à modifier. https://www.printables.com/model/1122656-bague-a-copier-parametrique-pour-festool-qf1010-pa Pour modifier le diamètre utilisez le fichier freecad et…
TP-Link TL-SF1008 industrial switch rack plate. Compatiable with DeskPi Rackmate series: T0/T1/T2 Good Heat dissipation Easy to assemble Wire slot opened on both sides. Free. Version: V0.2
This is a modified lid insert that removes some parts to make room for the strap that comes with the air duster.
This is a remix of Mr_3D BMW phone holder. The original is designed for a different phone holder. In addition, I wanted it to be modular. The ball joint is standard - 17 mm in diameter. It was designed for an F10, it was also tested in a…
I purchased both the NiteCORE CW20 and the WolfBOX MF100. The NiteCORE quality is leaps and bounds better although slightly less powerful / cfm. I modeled the 12mm tip after the WolfBOX and still wasn't as happy, so I remixed the 10.5mm…
NIKKO R/C Transmission Mounts. Fits various Nikko Frame Buggies. This is the part that holds the Transmission to the Chassis. Fits various NIKKO and Radio Shack R/C 1/10 Scale Buggies. Fits F10, Rhino, Bison, Dictator, Golden Arrow, Sears…
Ich war von meinem alten Anschlag leid, deshalb habe ich in den originalen Anschlag von Festool ein M5 Gewinde geschnitten und Langlöcher in den Anschlag vorgesehen. Bitte siehe Bilder I was tired of my old fence, so I cut a M5 thread in…
A little holder for your TP-Link TL-SF1008D eight port ethernet switch. You can conveniently slide the switch in and have it secured by the clip. Pulling on the ethernet cables only pulls the switch tighter into the mount, not out of it…
I found the available fan-attachments for the RF100 take up to much space around the printhead, and also sometimes don't produce enough airflow. This cooling solution utilizes a radial fan design and can be attached to the printhead using…
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
Slight edit to the rear edges of the chassis to add clearance for the Tamiya f104 tires, which rub on the stock chassis. This is the rear for the 2017 version chassis.
Simple Honeycomb holder for the Wolfbox MF100 and its its attachments.
WOLFBOX MF100 mount for Multiboard. Use Auto Tree supports from plate. Attach with 9 mm Small Thread, Flat Head, T-Bolt
NIKKO R/C Motor Mounting Bracket. Fits various Nikko Frame Buggies. This is the a bracket that holds the motor on the transmission on lots of different NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Golden Arrow,…
Crée a partir de ce model sur Thingiverse Bf-109 E (OUTDATED), fait par DeltaXF
This is a remix of Oliver_Ds cooling duct for the RF100 V2. Print instructions Category: 3D Printer Parts Summary This is a remix of Oliver_Ds cooling duct for the RF100 V2. Print Settings Rafts: No Supports: No
1u modifier keycaps similar to F10 profile. Designed for use with an ortholinear split keyboard, caps feature a ISO symbol-esque labels inset to 0.6mm. Stems are MX compatible, but depending on your printer tolerances, you may need to…
Just in case you're tired of printing useful things, here's something slightly pointless. A nozzle for the Wolfbox MF100 blower (as seen on Project Farm youtube channel; video1 and video2 - and others!) that replaces the mouthpiece for…
This is a simplified, wooden model of a 1954 Ford F100 Pickup Truck, inspired by ZenziWerken's CNC models. It is designed to be milled from 8mm plywood. For the axles 4mm aluminium rod is required. Important Note: This model cannot be cut…
Amélioration du modèle précédent (https://www.printables.com/model/465020-bague-a-copier-pour-defonceuse-festool-qf1010) par ajout d'une feuille de tableur dans le fichier Freecad.Le modèle a été complétement redessiné. pour permettre de…
Print with the front side down, requires minimal supports.
Original design by FSXPilot14 on Thingiverse. https://www.thingiverse.com/thing:5414118 Full credit to FSXPilot14 for designing the reinforced rotors. Key changes I made to FSXPilot14's design: Fin is much closer to tire (represents scale…
This is a simplified, wooden model of a 1954 Ford F100 Monstertruck, inspired by the famous Tamiya RC model "Midnight Pumpkin". It is based on my F100 Pickup Truck and designed to be milled from 8mm plywood. For the axles 6mm aluminium…
Karosseriehalterung hinten Tamiya F103 / Rear body mount Tamiya F103 gedruckt mit PETG / printed with PETG
This truck was designed to go with the PRR F-22 Flat car I posted http://www.thingiverse.com/thing:2069464 I used 3mm stainless axles cut to 1.86" long and 3mm x 3mm x 7mm bearing from eBay pressed into the truck sides. Print Settings…
Replace your old NP-F100 & 200 batteries with a Sony A6xxx battery. You will need : -x4 blade terminals 6mm (2 regular and 2 half-cut →3mm)) -x2 Electric wire -x5 10mm M3 screws Printable without support (be careful to orient the parts…
Stylish inspired keychain designed in the shape of a car front. Perfect for car enthusiasts, this keychain keeps your keys organized while adding a touch of automotive style. A great accessory for everyday use or as a small gift for…
NIKKO R/C Battery cover. Fits various Nikko Frame Buggies. Thi is the battery door that goes on the bottom of the NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Dictator etc.. Sorry, I didn't test it. Let me know…
It's a push fit, not a snap. Quick and dirty remix, so some post processing may be necessary to get it to fit in the holes.
Dragy includes magnetic, adhesive-backed mounting plates with their sensors, but I did not want to leave the mount glued to my dash or otherwise visible when not in use. This mount is designed to fit into your ashtray, which positions the…
This fits a BMW F11 and maybe also other BMW cars from around 2015. If the old cable brakes, this is a replacement of the ring at the cap and the cable. The original ring has to be removed from the fuel cap. Be careful not to brake…
Simple Honeycomb holder for the Wolfbox MF100.
Print with supports. Adjust XY Size Compensation/Horizontal Expansion for a looser fit.
NIKKO R/C Motor Cover. Fits various Nikko Frame Buggies. This is the cover that holds the motor on the transmission on lots of different NIKKO and Radio Shack R/C vehicles. I think it fits F10, Rhino, Bison, Golden Arrow, etc.. Sorry, I…
I lost a vent cap on my headlights so I've made a copy of it. Someone may find it useful.
I made this model, first in years and my first design in Tinkercad. It allows the mounting of Coast CF1000R 1000L LED Rechargeable Flashlights that are currently sold in 3pks at costco. Design allows for the use of screws or zip ties.
Needed to replace a cover that didn't fit after installing OutbackMotortek crashbars on my motorcycle. Printed using ASA filament then painted using a high heat paint. I was impatient and rushed the finish job.
I have an old 1954 Minneapolis Moline UB with a roughly equally old Farmhand F10 loader. The hydraulic cylinder seals I replaced just a few years ago blew out so I had to replace again. Seals for this are a bit of a pain to get and what I…
Nikko F10 R/C Buggy Chassis Brace **Want More Free Designs? Like and comment. Knowing people are using my designs keeps me motivated to make you. Thanks! I'm releasing these files under the Creative Commons…
I needed a plate to mount a Givi Trekker Outback on the back of my 2018 Africa Twin, but didn't like the way the Givi/Kappa system worked in the SR1162 adapter kit, so I decided to design my own plate and get it laser cut. Step file and…
Fadenführung für Velux Markise. String guide for Velux sunblinds. FHL AF10B
I have a 2001 Land Rover Discovery II SE7 that was missing the spacers for the 3rd row seat passengers. The part (# EYF100250) is no longer available from Land Rover, so I made my own in Fusion 360. Print Settings Printer Brand: MakerBot…
A Gridfinity 1x2 holer for Wolfbox MF100. I did use reference from other Author
This printer doesn't come with parts cooling stock, only with a hotend fan that will switch on at 50C. In order to make this work properly, you will need to modify your RF100 further. In the stock situation , the fan is wired to the…
remix of the offset bracket slightly changed design for better 3d printing dont forget to scale before printing
A compact holder for TPLink TL-SF1005D Switch that can be mounted on any wall or under desk.
I was looking for a demonstration vehicle to try the 350C hotend on the new Elegoo Centauri Carbon 2. I wanted to try the new Polymaker PPS-CF10. Jsmaz3 made a fantastic handbell model ( Make of PPS-CF10 Bell by Simple3D | Download free…
This is an adaptor to fit the Lomo RF-4 360mm f10 lens to a Copal 3s Shutter. As different copal 3s may have different thread size, adjust the parameter in the SCAD code to your needs. Ensures that threads.scad and modules.scad files are…
The Renkforce RF100 is really an interesting little machine, sturdy, cheap and comes with a set of tools for printing - tools which would soon be found all over the place. Time to do some tool management. This Toolholder is small enough…
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 30 mm from the rail, the second one another 26 mm for the next milling. Two-color version
Meet the Benchy SF1000 — a wild fusion of racing adrenaline and nautical adventure! 🚀⛵ This bold creation transforms the classic 3DBenchy into a high-octane, Formula 1-inspired speed machine, complete with sleek aerodynamic wings, chunky…
Remix of @ripley’s Honeycomb Storage Wall – Wolfbox Air Duster Storage to fit the GOEWS mounting system. This GOEWS Wolfbox MF100 Holder keeps the same form-fitting cradle for the Wolfbox MF100 air duster but swaps in 2x vertical GOEWS…
Tri-Bahtinov Mask for Meade LX85 ACF 8inch F10 SCT Category: 3D Printing
This remix adds about 10mm to the mount so the front end sits further away from the wall. I'm using the F104 tires and they're thicker (taller) than the printable tires which made the original mount too narrow and the back tires were…
Manufactured by Messerschmidt, it first took to the skies in 1935, and saw combat in the Spanish civil war, and fighting until the very end of ww2.
This design couples an Amscope WF10X eyepiece with a plate to support and align your cell phone (Google Pixel 7 in this design).
These items are for making the F06/F10 steering wheel unlock and engage the SZL on E8x and E9x BMWs when swapping to the newer steering wheel. Print from a temperature-tolerant filament (e.g., ASA, ABS, PETG, PA6/PA12) and affix in place…
I used this with the Threadboard system so I can add it to my butcher blocks, close to my printers. I noticed when making it and testing, some attachments are bigger than others. This makes it difficult to get all the slots to fit…
