Flashforge IFS Adapter for PC4-M10 fitting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the stock inlet/outlet IFS caps using pass through PC4-M10 quick fits. Fits AD5X and Creator 5 Pro.
- Rating
- 4.9 / 5
- Likes
- 125
- Downloads
- 530
- Makes
- 5
- Views
- 3,528
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
After cutting myself on a star washer then losing the stupid thing somewhere under the printer table, I broke out the calipers and came up with this. Completely replaces the existing caps and washers and allows you to easily change the PTFE as needed.
The collar rotates onto the IFS fitting hand tight one quarter turn and locks into place. The PTFE fitting can be hand tightened and stay usable or you can use a wrench and tighten it into place a bit further.
I printed mine in PLA with an outer brim at 0.16mm layer height and have had no issues with coming loose or failing to feed filament.
You need to insert the PTFE tube all the way in until it bottoms out, about 35 mm (depending upon how snug you screwed the fitting. The collar has a snug hole to help in alignment.