126 models
As the filament is loading and unloading this cause the PTFE tubing to move and add a ever so slight pull upwards on the ring inside the fitting, this causes it to get stuck on to the tubing, making the standard method of removing the…
all stock hardware. I used pps-cf filament but anything should work
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 17th Dec 2022: Updated "Christmas Lantern Box - Middle.stl" as the holes at the bottom was a bit offset. My bad! IF YOU LIKE THIS MODEL, CONSIDER ALSO DOWNLOADING ANOTHER…
This is best installed with the holes facing upward. Removing the Old One (Optional) You can remove the existing one quite easily, by popping it into the enclosure housing, and disconnecting the 4-in-1 PTFE connector from the extruder. It…
PFTE removal tool for IFS Flashforge adventurer 5X AD5X
READ THIS TO BETTER UNDERSTAND THIS MOD BEFORE PRINTING This mod needs you to flip the IR sensor connector so be ready to swap cables as described below. You can damage the sensor if you will not follow these instructions. Updates at the…
Help with tube and cable management, by making the tubes a tight bundle you are able to get a better gradual sweep to help with filament feed, the longer on goes but the 4 n 1 adapter this keeps a slight sweeping of the tube for…
After cutting myself on a star washer then losing the stupid thing somewhere under the printer table, I broke out the calipers and came up with this. Completely replaces the existing caps and washers and allows you to easily change the…
prepare Sandpaper is 230×280 (9"×11") - the length you need is 230mm so cut a small (8 or 15mm) stripe along the 230 side. Put some tape centered on the back of the sandpaper end (half overlap). Put the sandpaper around the springy end…
This is implementation of Bondtech feeder with Prusa internal filament sensor (IFS). You need extend some holes with roamer 3 mm and thread M3, M2 (for filament sensor) and M6 for fittings. Older version without filament sensor
je vous propose 2 pièges sélectifs pour Frelon Asiatique. à poser ou à suspendre https://www.facebook.com/1547673239/videos/pcb.10222853008944256/466276335754321 c’est le moment de les installer pour éviter une invasion cet été. le…
I received the updated spools for the AD5x and they work fantastic except that they raise the center of the spool upwards so some of my cardboard spools would rub the IFS with channel 1 and 4 spools. I made this adapter bracket to lift…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
Schleifspindel / grinding spindle Schleifspindel in den Größe: 30mm x 50mm 50mm x 50mm 80mm x 50mm Bohrung für Gewindestange: bei 30mm -> 6mm bei 50mm -> 6mm bei 80mm -> 8mm Grinding spindle in the size: 30mm x 50mm 50mm x 50mm 80mm x…
Somehow I never got around ordering sanding pens despite the fact that I needed them on a regular basis. Perhaps the sanding paper glued on popsicle sticks worked well enough for the short moment of 20+ years.... But then I stumbled over…
[FR] Emporte-Pièces Éducatifs pour les Petits Explorateurs! 🌈👶 🔵 Le Cercle Enchanteur - Découvre le monde des cercles! 🌎🍪 Le Cercle Enchanteur est parfait pour les petites mains curieuses. Il permet d'apprendre les formes et les couleurs…
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
shopping cart token with Škoda octavia motifs / žeton do nákupního košíku s motivy škoda octavia
🔧 IFS Bracket – Flashforge Adventurer 5X / AD5X A simple mounting bracket for relocating the IFS (Intelligent Filament Sensor) on your AD5X. This model is designed primarily for modders who want to move the IFS to a different location —…
Small and simple grindstone holders for Tormek stones. There are 3 different versions: 250mm: high: 140x120x30 mm 94g / 20% low: 139.4x110x25 mm 79g / 20% 200mm: low: 120x100x25 mm 59g / 20% The original version is the high profile…
Simple buttons to make removing the PTFE tubes on the IFS easier. You want the closed button for leaving on the IFS and the open for taking it off the first time.
Deutsch: Ich hatte auf Youtube ein Video zu einem ähnlichen Halter gesehen (aus Holz) und wollte das ganze für den 3D Druck designen. Halter funktioniert prima und man sollte die Scheiben direkt auf den Exzenterschleifer (einfach an den…
shopping cart token with Škoda motifs / žeton do nákupního košíku s motivy škoda
Po zkušenostech s modelem https://www.printables.com/cs/model/415374-zalozka-do-knihy-ctyrlistek-bookmark-cloverleaf jsem namodeloval tento model. Neničí stránky knih jako výše zmíněný typ záložek. After experience with the model…
shopping cart token with Škoda Fabia motifs / žeton do nákupního košíku s motivy škoda Fabia
Modelo do personagem Baby Groot da Marvel, com modificação para suporte de celular. Feito pelos alunos Bruno Messias, Otavio Frassão, Julia Monguini, Erick Almeida, Maria Eduarda, Luiz Gabriel, Igor Candil, para a matéria Desenho…
what you need for the conversion: FYSETC Prusa MINI Dual Drive Extruder 14-17€ Prusa MINI Filament Sensor ⬇alternatively⬇ 13-15€ Filament Sensor KIT version 5-6€ 1x M3 *8 screw for FYSIFS_fsmodule 1x M3 *12 screw for FYSIFS-fs-lever You…
The base shape is the cross-section floor plan of KLCC / Petronas Twin Towers. This cross section shows 2 squares interlocking to each other to form an 8-point star shape, which is the most common shape design in Islamic design. The…
Damit kannst Du deine Schleifschwämme (ich habe diese hier: https://amzn.to/3b4Nq17 ) organisieren und den Halter z.B. an einen French Cleat Halter montieren. Die Schwämme sitzen perfekt und können vorne mit einer Hand rausgezogen werden.…
Miele Motif Dispenser various motifs
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
Halter für 12 Schleifstäbe! Auf der Rückseite befindet sich ein Sandpapier Lager, für Nachschub !
TURKISH ANTIC MOTIFS FIBONACCI WALL ART Small figures are figures with their meanings that are used everywhere in Turkish culture, from carpets to clothes. I created a stylish wall art by placing these figures in a Fibonacci shape. You…
I made the original model (in PETG) but it bent, so I thickened it.
Easy installation without removing the tubes. For reliability, it consists of two parts connected by 2xM6 nuts. Both parts are optimized for TPU 95A printing An M6 nut is used for the connection from here Print Instructions PLA outer and…
3er Schleifschwammhalter für Wandmontage oder FrenchCleat
My Flashforge AD5X setup called for a front facing IFS mount to be inline with my dryer box. Nothing was quite matching what I needed, so I designed one in tinkercad. Once installed, it was clear that the IFS cable needed to shift to…
Choisissez la taille de votre impression, décorations de Noel pour votre sapin, fenetres, portes ou murs, il y a ( modèles différents. Imprimez avec une hauteur de couche à 0.2 et remplissage à 20%.
Een gewoon schuifslot, ik heb er ook versie bij gedaan dat je kan sluiten met een veiligheidsspeld. De veiligheidspin kan je kopen in de ijzerwinkel. Ik heb ze niet afgedrukt. An ordinary slide lock, I also added a version that you can…
Recently i bought a mini sander in addition to my regular one. It is very useful for smaller details or smaller pieces. The set was bought from amazon . Other kits might work aswell if the size fits. For the toolhead and sand discs i've…
A simply remix of Rear part for fit a pneumatic connector PC4-M6. the part remain compatible for printing without sup.
Záložky s motivy zvířecí kůže nebo srstí a čtyřlístkem. Bookmarks with motifs of animal skin and four-leaf clover.
UPDATE: my desing is no longer up to date and therefore not needed. i still leave it online for comments Use the original files there . Yesterday the original printed and then determined that a few minor things should still be changed.…
Pro spodní detaily bude dobré klidné tisknout 0,2 tryskou :-) For the lower details, it will be good to print with a 0.2 nozzle :-)
2 files for printing pla(petg) or tpu 95a. Differ in the cable tube. no support 4 wall loops 20 % infill density
Important! As you know, our printer doesn't have a filament jam sensor. Therefore, even if a filament jam occurs, the printer will attempt to pull the blocked filament. Therefore, we strongly recommend using increased infill, as if this…
I found this extruder on Aliexpress, and it is very cheap (from Haldis), i decided to try it, due to the fact that uses a IDGA-RIDGA similar approach. It means that the gears has not shaft tollerance problem, so it is a good option for a…
small bracket for raising the AD5X IFS bracket to clear spools and better fit the enclosure kit requires two 3mm x 10 mm long screws, two washers, and 2 nuts for the IFS bracket. Reuse the old 3mm screws for the bottom holes.
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store If you've got short tubes with connectors…
This mod is compatible for Mk3s and X linear Rail from KaleKnall here https://www.printables.com/model/16838-prusa-mk3-mk3s-mk3s-x-axis-linear-rail-guide-upgra And TBG-S from trianglelab here https://s.click.aliexpress.com/e/_DmgYNUt I…
I inherited a Bondtech extruder that didn't come with the internal filament sensor parts and needed to make my own instead of waiting on shipping. I don't even think they sell the parts anyway, as extruders just come with the little…
Ein simpler Schleifscheibenhalter für den Durchmesser 115mm von Winkelschleifern. Das Modell kann erweitert werden. A simple grinding wheel holder for angle grinders with a diameter of 115 mm. The model can be expanded.
Ich habe die Größe angepasst, so passen die 330mm x10mm Schleifbänder des Proxxon BS/A 29810 Bandschleifers
Ich fand es ein zu umständlich, die Halterungen auszubauen, dann die Schleifsteine zu tauschen um dann die Halterungen wieder einzusetzen. Daher habe ich mir neue Halterungen gedruck und muss nun nur noch die Halterungen tauschen. Die…
Une petite boite pour sécher les appareils auditif. 31.1 de diamètre et 12.7 d’épaisseur. Résolution→0.2 mm remplissage à 40% 3 ou 4 grammes de silice suffise IMPORTANT! Pour créer la grille, les périmètres suivants doivent être définis :…
Pendantifs pour etirette ,fixation facile
This is the coat of arms of the University and Hanseatic City of Greifswald, located at the Bay of Pomerania. Tags: Wappen
Aus einer Schubladenbox zur Aufbewahrung von A4 Dokumenten ist eine Aufbewahrung für Fräser und Schleifstifte entstanden. Dabei waren die offenen Griff-Öffnungen, wegen der staubigen Umgebung störend. Die Griffabdeckung ist mit…
Cookie Decorating Stencil Set – Christmas Motifs This model is a simple and practical cookie decorating stencil set with festive Christmas designs. Just place the stencil on top of your cookie and sprinkle powdered sugar, cocoa, or spread…
Acanthus model, needed to replace a broken design on a hutch
Stamp wheel from the Scandinavian motifs middle #9 This digital 3D printable model is designed for creating textures in clay, polymer clay, EVA foam, and other materials. We want to make more models like this. If you want to let us know…
Hunger and blood dice for vampire the masquerade 5th edition, including pop-culture motif designs which replace the critical success face with the a common vampire media symbol. I have not yet attempted to print these files yet and as…
Deckel für Schleifscheibenhalter. Der passende Schleifscheibenhalter für 125mm Schleifscheiben ist hier zu finden: https://www.printables.com/de/model/120948-grinding-discs-o-125-mm-organizer-high-and-low
Internal bumper for Bostitch MIIIFN Flooring Nailer and MIIIFS Flooring Stapler. Notes: This is for the older version of the nailer or stapler with the metal spacer. If you have a version without that spacer, you'll need to increase the…
So I lost one of the 10x6x2mm magnets from the Prusa Mini stock filament senor. Unfortunately, I didn't want to buy a replacement magnet, and I had an extra 20x6x2mm magnet lying around. This alternative magnet holder lets you use a…
Záložky s motivy zvířecí kůže nebo srstí a digitální kamerou. Bookmarks with animal skin or fur motifs and a digital cam
Schleifscheibenhalter für Schleifscheiben mit 115mm und 125mm Durchmesser Grinding wheel holder for grinding wheels with 115mm and 125mm diameter
Kompakter Halter für 3 Schleifschwämme (70 × 25 × 100 mm) . Perfekt für eine saubere und griffbereite Organisation an deiner Werkzeugwand. Features: Platz für 3 Schleifschwämme Passgenauer Sitz Offenes Design für Belüftung & schnelles…
Description This model is the basic model of a snap-on “pop-on” front plate for the Woom bike basket. The basic model consists of a peg for attachment to the bike basket and a 3 mm thick front plate that can be individually designed in…
Ces dés éducatifs sont conçus pour rendre l’apprentissage du français plus ludique et interactif. Chaque face présente un mot-clé : pronom, verbe ou indication de temps. En les combinant, les élèves peuvent créer des phrases simples et…
pendentifs travaillé sur base de rosace. imprimé en pla Plus
Die Aufsteckhilfe kann mit dem Griff, oder ohne auch an eine Wand geschraubt werden und eine ohne mehrere Scheiben aufnehmen. Drucker Prusa MK4 Material PLA Infill 15% The attaching aid can be screwed to a wall with the handle or without…
Tellerschleifer Update; Der DS140 ist sehr günstig, und trozdem eine Drezahlregelung , aber leider kein Klett für die Schleifscheibe. Die Alu Platte lasst sich nicht verschieben. Deswegen fehlen die 2-3 mm für den Aufbau - Einfach zu…
Ein Schleifschutz für einen kleinen Druckluftschleifer ( Stahlwerk) Winkelschleifer. Wenn man Trennscheiben einsetzt und einen Funken/Fingerschutz braucht ist dieser Schutz Ideal.Klemmung auf das Gehäuse mit M5 Inbusschraube und…
This Model has 3 3D printing motifs: Benchy, Nozzle, Hexagons
pendentifs grigri style futuro en pla argent.
Ein Sortierkasten für meine Schleifspindeln des Scheppach Spindelschleifers , bei mir steht der Spindelschleifer auf einer ablage und das herum greifen um die Maschine ist nervig daher ein Sortierkasten. Der Sortierkasten hat innen L+R…
Yanfei themed 2d decorations wich i used for my pc build
A Heartkluchifs 3d fractals. Happy printing.
Camera Holder iFEEL Vega IFS-CI004
Jeff the land shark Original mesures: Height: 100.0 mm Width: 76.3 mm Length: 173.9 mm It was removed the interior of the head to reduce the wasted material; Divided him into three parts to reduce waste on supports; Parts mesures: Head:…
Stackable Sanding Disc Holder with Drawers 125 mm (5") or 150 mm (6") This stackable sanding disc holder features drawers at three different heights. The model is designed for 125 mm (5") discs. To use it with 150 mm (6") discs, simply…
Ø90 mm Norse drink coasters with a twisted-rope (cable moulding) lip , wood grain carved across the well, and one of twelve motifs engraved into the middle. Every coaster ships with an exact-fit inlay for two-colour AMS printing, and the…
Geschirrspüler Eingreifschutz wenn in Betrieb - Magnetisch für Siemens mit "INOX"-Blende - 6 Versionen - Druckpause bei 3.2mm => nach belieben 4-8 Magnete ( Ø10x2mm ) einlegen
A reading guide strip that keeps young readers on the right line: the long cut-out window frames one line at a time and hides the rest of the page. The flat strip measures 180 × 44 × 2.7 mm, spans a standard book page and has a small hole…
On the Toyota Tacoma Pickup (1995.5-2004) and 4Runner (1986-2002) and 4WD Pickup/Hilux (1986-1995) models, with suspension lifts over 2", the front CV axles will operate at an increased angle, which increases wear and tear on the CV…
Six Christmas coasters, each with a clean white winter motif inside a ring: a snowflake, a tree, a star, a bauble, a bell and a gift. A tree-shaped holder keeps all six on a table or shelf, standing on edge like a little advent display.…
Schleifscheiben Halterung mit Öffnungen zum Abtropfen. Geeignet für Schleifscheiben mit den Maßen 250x50mm
I am using self-gripping abrasives that I cut from a roll to 75x100mm. I have the four standard different abrasive grit : 80, 120, 180 and 240. The main issue is to sort them and to keep them protected. I designed a box with a lid to put…
3D printable topographic miniature of Chengdu, Chunxi Road - IFS - 🇨🇳 China Capture the beauty of Chengdu, Chunxi Road - IFS 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo…
As the filament is loading and unloading this cause the PTFE tubing to move and add a ever so slight pull upwards on the ring inside the fitting, this causes it to get stuck on to the tubing, making the standard method of removing the…
I purchased a set of “M10” ptfe fittings off amazon that ended up being M8. This is a remix of the 3.28.22 “MINI-extruder-rear-IFS” part file, now using a M8 thread. This removes the need for those brass olives. Someone else had made a…
Cookie Decorating Stencil Set – Christmas Motifs This model is a simple and practical cookie decorating stencil set with festive Christmas designs. Just place the stencil on top of your cookie and sprinkle powdered sugar, cocoa, or spread…
🔧 IFS Bracket – Flashforge Adventurer 5X / AD5X A simple mounting bracket for relocating the IFS (Intelligent Filament Sensor) on your AD5X. This model is designed primarily for modders who want to move the IFS to a different location —…
Stackable Sanding Disc Holder with Drawers 125 mm (5") or 150 mm (6") This stackable sanding disc holder features drawers at three different heights. The model is designed for 125 mm (5") discs. To use it with 150 mm (6") discs, simply…
