1 / 4
Slim RPi DIN mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Single-part design.
4 x M3x6 screws used as DIN grips.
Modeled M3 threads - fine with 0.2mm layer, best with 0.1mm layer.
Slim - 8mm stand-off from DIN rail.
Integrated supports - made as a separate body, so you can remove them right in your slicer if needed. (setup for 1 bottom, 1 perimeter, 0 top)
Printed: 0.2 layer; 2 perimeters; 4 bottom; 5 top; 25% cubic infill.