1 / 1
Bike chain dryer for Wolfbox Megaflow-100 MF-100 — image 1

Bike chain dryer for Wolfbox Megaflow-100 MF-100

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Dry chains quickly and effectively with the Wolfbox MF100 blower.

Rating
5 / 5
Likes
7
Downloads
37
Makes
1
Views
229
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement nozzle for the Wolfbox MF-100 that dries a bike chain quickly. Fits 11 or 12 speed chains. Might be tight on lower speed chains.

To use:

  • install it on your blower

  • power on the blower

  • put the nozzle on the chain so that the chain runs through the guides

  • start the blower and turn the pedals backwards

Will this fit the XYZ blower?

Probably not. I've seen a couple blowers and they all use different mount styles. I've got an "F33" blower which seems to have the exact same guts as the Wolfbox, but the mount is 8 pegs and a center magnet. I created one for that, but the magnet doesn't hold well enough and it falls off the blower too easily. I know Wolfbox now has the MF-200 blower but I have downloaded a nozzle for that and the size is all wrong for the MF-100.

I bought the MF-100 because of it doing well in Project Farm and Torque Test Channel youtube video reviews, and have been happy with it, so can recommend it. There might be better, but this one works, and the nozzle interface is secure enough to make replacement nozzles like this viable.

Print instructions

Print is easy - orient it with the large round end on the print bed. If you've got good bed adhesion, you can print it like that with no supports. If your bed adhesion isn't great, turn on an inner brim. You could do an outer brim but that's harder to clean up well. An inner brim can be cleaned up quickly with a deburring tool.

I printed at 0.2mm layer height for a 0.4mm nozzle in PETG. 4 shells should be sufficient. If you want a smoother interior for possibly better airflow, you could print at a much lower layer height. I've also experimented with painting on a 2 part resin and honestly couldn't tell if it made anything better.

Tags