Ladder Edgeprotection Stepprotection Hailo Compatible 2 Variants
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Corner Protection for Ladder Steps. prevents snagging of Trousers.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
Corner Protection for Ladder Steps
Our ladder has ruined too many trousers after the original plastic edge protectors became brittle and disintegrated.
The replacement parts I originally bought didn’t fit properly and were quite expensive. Since I couldn’t find anything suitable online, I decided to design my own.
We have two older step ladders from Hailo, but unfortunately the aluminum step profiles are different. Because of this, I created two separate versions: one for the “sharp” profile and one for the “round” profile. There may be additional variants, so please check the fit before printing multiple pieces.
Unlike the original parts, these can be pressed on from the outside, which makes installation easier.
Files:
Fusion 360 and STEP files are included (use the STEP file for printing).
The parts are provided for one side only. Since they are symmetrical, simply mirror them to fit the other side of the ladder.
Recommended print settings:
4 perimeters
1.6 mm top/bottom thickness
40% infill
Print orientation:
Lay flat on the backside
Material:
PETG
Supports:
Not required