Arctic Cat - Pad, Shock - 1604-429
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Copy of Arctic Cat - Pad, Shock - 1604-429 to be printed in TPU, for the bumpstop on the trail of Arctic Cat…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Copy of Arctic Cat - Pad, Shock - 1604-429 to be printed in TPU, for the bumpstop on the trail of Arctic Cat snowmobiles (A 2004 Arctic Cat Pantera 800 136" in my case)
Needs to be printed out of TPU to stay stiff and flexible. You will also need a 10-24 x 1.25" Bolt, washer and Nylock Nut
Print Settings
Printer Brand:
Prusa
Printer:
MINI+
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Notes:
Print with open section facing up, no supports should be needed but you can add organic supports if needed for the bolt hole (can be cleaned out if needed with a 13/64" drill bit, or 5mm in metric)
Category: Other