1 / 3
Print in place Bi-Directional Ratchet Screwdriver — image 1
1 / 3

Print in place Bi-Directional Ratchet Screwdriver

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

After ~30 test prints and a mildly chaotic design process, I ended up with a fully 3D printable, print-in-place ratchet.

Rating
4.714 / 5
Likes
171
Downloads
657
Makes
5
Views
3,167
Reviews
7

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Blog: https://dev.joesturge.com/p/3d-print-in-place-a-design-journey/

OnShape Files: https://cad.onshape.com/documents/5b146e263caac3060752204d/w/15bde26dc6901519c376ed2c/e/cecbda455fb1c20a8470df09

Features

  • Fully print-in-place – no assembly required

  • Accepts standard 6.35mm (1/4") hex bits

  • Bi-directional ratchet (left / right)

  • Lock position

  • Surprisingly strong and usable

  • Designed to print cleanly on a well-tuned printer

Print Settings

The screwdriver is carefully designed to not be too dependant on print settings, but I would recommend a layer height of 0.2mm and 15-20% infill, more if you like it to be weighty.

Optional (but highly recommended) - Use Fuzzy Skin on the flat parts of the handle to add a nice gripping surface

Important

  • Tolerance matters – if your printer is not dialled in, it may fuse

  • Designed with ~0.3mm clearances

  • If it doesn’t move after printing insert a hex bit and force it to turn as if you are unscrewing something really sharp and fast, you should hear a crack, then you are good to go

How It Works

The ratchet mechanism is fully internal and prints in place using small clearances.

It relies on:

  • angled ratchet teeth

  • a sliding selector

  • controlled flex in printed parts

If you’re curious about the design process (and all the failures along the way), I wrote it up here:

https://dev.joesturge.com/p/3d-print-in-place-a-design-journey/


Known Quirks

  • May feel slightly “crunchy” depending on your print quality

  • First movement after printing can require a bit of force

  • PLA works for me, I have not tired in PETG but it should be even better with that

Tips

  • Use fuzzy skin in your slicer for grip (looks great, feels better)

  • If the selector is stiff, work it back and forth a few times

  • If parts fuse:

    • check flow calibration

    • slightly reduce extrusion multiplier

Tags