Knife holder for grinding machine
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.34 – €4.08 net (excluding VAT)
For file: knife_holder_0.2mm_PETG_MK3S_4h17m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.71 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 4.28 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Knife holder for grinding machine to ensure precise edge angles on the blade.
- Rating
- 0 / 5
- Likes
- 34
- Downloads
- 190
- Makes
- 0
- Views
- 1,028
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
The parts for the knife holder are printed with PETG and are in use for a grinding stone ⌀200mm.
Part list:
- knife holder | quantity: 1
- knife guidance | quantity: 1
- threaded bar M10 | length: 100mm
- hexagon nut M10 | quantity: 2
- cylinder screw M4x10 | quantity: 2
- hexagon nut M4 | quantity: 2
Assemble instruction:
- Mount hexagon nut M10 to threaded bar M10
- Insert threaded bar to knife holder
- Counter hexagon nut
- Insert threaded bar M10 to knife guidance
- Mount hexagon nut M10, adjust to required length and counter knife guidance
- Insert hexagon nut M4 to knife holder (2x)
- Mount cylinder screw M4 to knife holder
- Add your knife to the knife holder, adjust position and tighten cylinder screws