1 / 2
Shimano MTB/Gravel spikes for BHCS — image 1
1 / 2

Shimano MTB/Gravel spikes for BHCS

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement MTB/gravel shoe spikes (i.e. Shimano Sphyre XC9) that fit an M5 BHCS

Rating
0 / 5
Likes
2
Downloads
2
Makes
0
Views
53
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Found the original by @Dabal_640841, but didn't have any sockethead screws in the sizes suggested., however, I had a bunch of M5x10 BHCS (button head) from my Voron build. Revamped to fit the wider screw head and 10mm length to match the original screw lengths into the shoe. 

Warning: these can be a little slippery when you're on the toe part of your step and on a slick surface like hardwood floors, tile, etc. I would recommend (haven't tried it yet, but will in the future) to print the last few layers in TPU for some grip.

Printed in ASA

0.2 layer height

4 walls

5 top & bottom shells

40% Infill, Gyroid

Tags