1 / 2
Shimano MTB/Gravel spikes for BHCS — zdjęcie 1
1 / 2

Shimano MTB/Gravel spikes for BHCS

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement MTB/gravel shoe spikes (i.e. Shimano Sphyre XC9) that fit an M5 BHCS

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
53
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Found the original by @Dabal_640841, but didn't have any sockethead screws in the sizes suggested., however, I had a bunch of M5x10 BHCS (button head) from my Voron build. Revamped to fit the wider screw head and 10mm length to match the original screw lengths into the shoe. 

Warning: these can be a little slippery when you're on the toe part of your step and on a slick surface like hardwood floors, tile, etc. I would recommend (haven't tried it yet, but will in the future) to print the last few layers in TPU for some grip.

Printed in ASA

0.2 layer height

4 walls

5 top & bottom shells

40% Infill, Gyroid

Tagi