DIN rail mounting adapter designed for Milesight industrial routers USR325 .

DIN rail mounting adapter designed for Milesight industrial routers USR325 .

This adapter allows secure installation of the router on standard DIN rails commonly used in electrical cabinets and industrial environments.

The model has been test printed and verified in a real installation.

Printing orientation and mechanical considerations

The part must be printed vertically, as shown in the provided print profile.

The locking tab is designed to slightly flex during installation on the DIN rail.

Printing the model vertically ensures that the layer lines follow the direction of mechanical stress, greatly improving strength and durability.

Printing in other orientations may cause the tab to fail due to layer separation, since FDM parts are weaker between layers than along them.

The model was specifically designed with FDM layer orientation in mind for improved mechanical reliability.

Supports

Supports are not strictly required, but are recommended if perfectly round holes are desired.

Without supports, the holes may appear slightly deformed due to overhang bridging.

Adding light supports in the hole areas improves dimensional accuracy.

Recommended:

• Vertical orientation

• Light supports only for hole regions (optional)

Hardware required

Only 2 × M3 screws (20 mm length) are required for installation.

Printing recommendations

• Layer height: 0.20 mm recommended

• PLA or PETG recommended

• Print vertically as provided

• No general supports required

Designed for practical industrial use and easy installation.

Feedback and improvements are welcome.