Epic mounted knight miniature
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Epic mounted knight miniature designed for 3D printing.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 62
- Makes
- 1
- Views
- 171
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Epic mounted knight miniature designed for 3D printing.
Test printed successfully in FDM. Details remain visible even at medium layer heights.
Printing tips
Layer height: 0.16–0.20 mm
Supports recommended under the horse and cape
Scale up for best details in FDM
Resin printing recommended for maximum detail
Suitable for tabletop, diorama or display.
Supports and printing notes
This model was test printed in FDM and works well, but some areas need supports.
Issues encountered during printing
The underside of the horse body needs support
The cape requires light supports to avoid sagging
The front legs and sword area benefit from supports to keep details sharp
Small marks may appear where supports touch the model, especially under the horse and near cloth details
Manual supports
If supports are not included or detected in the project, add manual supports in these areas:
Under the horse belly
Under the cape edges
Under the sword and arm area
Under the raised hooves
Under any overhang greater than ~50°
Recommended support settings (FDM)
Tree supports or light supports
Low density
Small contact points to preserve surface quality
Supports are included in the project but may need adjustment depending on slicer and scale.