1 / 4
Playseat Challenge T3PA Inverted Pedals
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket to mount Thrustmaster T3PA pedals inverted to a Playseat Challenge
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Open Community License v1.1 + General Attribution v1
Reversing the direction of the original pedal bracket is required. Use the Anchor Bracket to replace the stock part holding the bracket to the rest of the rig.
Remove the smaller diameter half of the tubular pedal bracket and slot it into the Inverter Bracket and reassemble.
3x M6x1.0 x20mm screws are required to mount the pedals to the Inverter bracket.
PedalInverterBracketfor255mm.stl is provided with some under-utilized material removed to fit within X1C and Core One build volumes.
Minimum 2 perimeters with 0.6 nozzle in PETG.