1 / 3
Portable laptop stand - screw locking mechanism
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
You don't need to reprint the angled stands, just the middle section.
You also need to print 2 Knobs and screw into them M3x12 countersunk screws. It should be tight, so the knobs have something to grip the screws with, so they don't spin themselves
You also need 2 M3 nuts, to insert into the middle section. They should take some force to go in, so they don't fall out on their own.
NO supports required!
Required hardware:
2x M3 Nut
2x M3x12 Countersunk Head Screw
The nuts need to be inserted like this:
