Two Trees Sapphire Pro / Plus Hemera mount for EBM Pabst RLF35
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount should is just the same, as the Sapphire Pro/Plus Mount from mordant80, but I remixed the fan duct to work…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 37
- Makes
- 0
- Views
- 839
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount should is just the same, as the Sapphire Pro/Plus Mount from mordant80, but I remixed the fan duct to work with a EBM-Pabst RLF35, since they are used qute cheap around here.
Still experimenting with the flow-rate. 95% seems to be best.
This Mount worked best on my dual Z-Endstopps Sapphire Plus. By this revision, your going to reduce your Z-Height (350mm to 327mm) and your X-Axis (300mm/310mm to 292mm) a little bit.
The RLF is quite strong. I recommend to run it with up to 50% RPM only, since the heater cant keep up :-).
Used Firmware and Manual for connecting the BL-Touch:
https://github.com/RolfZuckowskiUltras/TwoTrees_Sapphire_RawMarlin
Print Settings
Printer:
TwoTrees Sapphire Plus
Rafts:
No
Supports:
No
Resolution:
0,16
Infill:
3D Gyroid 50%
Filament:
Prusa Prusament PETG
Urban Grey
Category: 3D Printer Parts