Snap-in Shelf/Divider Holder for Sterilite Crate 1693
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can pop this into the circular openings on a Sterilite 1693 Crate to hold dividers or shelves.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
Print in PETG for flexibility, but PLA will hold as well.
Increase infill density for desired sturdiness, but I've found it holds well at just 10%.
If you are printing your own shelves or dividers, 3mm of thickness should hold pretty snug. The gap is 3.5 mm. I am just using it as dividers using spare cardboard so I did not create a divider file.
There is not a perfect orientation for this print. You can play around with it and see what works best.
Added a file for the divider. May need to be printed in two parts depending on your printer volume.