Snap-in Shelf/Divider Holder for Sterilite Crate 1693
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can pop this into the circular openings on a Sterilite 1693 Crate to hold dividers or shelves.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Print in PETG for flexibility, but PLA will hold as well.
Increase infill density for desired sturdiness, but I've found it holds well at just 10%.
If you are printing your own shelves or dividers, 3mm of thickness should hold pretty snug. The gap is 3.5 mm. I am just using it as dividers using spare cardboard so I did not create a divider file.
There is not a perfect orientation for this print. You can play around with it and see what works best.
Added a file for the divider. May need to be printed in two parts depending on your printer volume.