Strat neck drilling guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drilling guide / template for Strats or "S"-Type necks and neck pockets.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 236
- Makes
- 1
- Views
- 1,209
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an drilling guide for Strat necks and neck pockets based on drawings from Warmoth and other sites. It should work without issues on Tele necks and neck pockets too without issue.
This drilling guide / template is NOT official and you should use this only as estimate, and not completely rely on this drilling guide when drilling you neck mounting holes or neck pocket holes! Please be aware that there is an huge range of deviations, so this drilling guide/template might not work on your neck or body!
I used this template successfully on the first iteration on my new aftermarket neck. Originally the neck mounting holes would be 1/8" or 3.175mm, I used 3.5mm. Neck Pocket Holes typically are a bit wider.
Please be careful, measure and check twice, drill once!
I am not affiliated or associated with the company FMIC or Warmoth in any way.