Counting matching models…
This is the second version of my Voronoi Stratocaster. The files for the first one have been lost, so we will pick up here! This second version fixes several issues with the first. Many of the dimensions were changed to work better,…
MetiKoro is a strategic board game for 2–4 players. This 3D-printable game is thoughtfully designed to be easy to learn while offering deep strategic gameplay, completely free of random elements. Update 2025-01-21: Added a large board…
Leaves Leaves is my original, never-before shared abstract strategy game. In the game, two players fight to have more leaves on the tree when the game ends. Each turn, new leaves are added to the tree , in an interesting fashion, pushing…
A set of bevel gears where the pinions have half the teeth of the ring gear. This results in a 0.5 reduction in angular velocity from the drive gear to the free gear. The holes are designed for 8mm diameter shafts, and the free gear sits…
Rules (there are several versions) https://www.ultraboardgames.com/stratego/ultimate-stratego.php https://www.ultraboardgames.com/stratego/game-rules.php https://board-games-galore.fandom.com/wiki/Stratego There are many other Stratego…
As a part time job I tutor GCSE maths in the UK. One of the key areas we cover are geometry. In most areas in life it will be rare to never need to use this fundamental equation. having an understanding will make using it so much easier.…
100% infill for strength. 0.2 layer height If anyone is interested in a coin fender opener please let me know and I will make one. Added coin version for 10 cent, and 1 SEK Added colorversions. Feel free https://paypal.me/gillislindstrom
Originally from https://www.prusaprinters.org/prints/27919-hive-strategy-board-game-for-2-players-mmu-not-nee/comments#comment-125268?utm_source=prusaprinters&utm_medium=email&utm_campaign=notif-print-comment-reply&utm_content=item Moved…
Do you also love hydroponics, but you drown in substrate? Here is the solution for you! Indoor hydroponics without substrate. This gives the plant even more room to grow and you have to worry less about vacuuming the pellets that fell…
Scale in almost any size you like and slice so that it starts in black then changes to white and then orenge then red. remix into a magnet or blow up to 30 inches high your choice. Display it somewhere prominently to make alien diplomats…
About Tock The Ultimate 3D-Printable Board Game for Family Fun Are you searching for a unique, engaging, and genuinely useful 3D printing project? This is a complete, 3D-printable Tock board game that provides hours of fun for the whole…
A backplate for Fender Strat with offset fender logo. I would reccommend printing with the logo facing down and then filling in the logo with permanent marker so as to make it nicer.
Box for airgun pellets - Straton Box for airgun pellets in the shape of JSB Straton. The box can hold approximately 200 pcs of airgun pellets.
Briggs and Stratton lawn mower not starting? Try this replacement ratchet pawl to get your mower started quickly. Print with supports on the bottom and make sure that the hole is opening up.
This design is based on a card stock model by J.L. Snider, Oberlin College, 1992. It is intended for educational outreach & demonstrates the Sun's daily motion & position above the horizon for northern (or southern) latitude observers for…
SteelSeries Stratus Duo Stand
Most of what you need to know about this game is found at boardgamegeek link below https://boardgamegeek.com/boardgame/949/twixt Rules are also found in one of the pictures above. The original game was designed to be split into 4 8"square…
Add an hour dial to your Solar Motion & Position Demonstrator to show how time is related to the position of the sun in the sky. The original demonstrator is available from here: Solar Motion & Position Demonstrator by 3DMason | Download…
Motorcycle license plate holder for Spanish plate Materials: 4x insert M4 4X screw M4 x 10 2X insert M3 2X screw M3 x 20 2 pins Ø 3mm
This phone stand takes advantage of the beauty of organic supports, which are now available in PrusaSlicer since version 2.6. Of course you can print my design, but I reccomend to make your own! Everything can be done directly in…
I use this box for seeds that need stratification. I place paper towel in the troughs and then seeds in the rows. The bottom drain allows water to drain from paper while keeping moisture on the seeds. You can add water by pour into bowl…
strata vase modern minimalist vase design full dimensions in mm ~ x: 120 · y: 120 · z: 200 photos show printed in the awesome Vibers PLA colours, that were kindly provided by ColorFabb includes profiles for x1c and a1 mini (@85% scale)…
Replica of Fender Stratocaster knob. I made it also for lefthand guitar! update: added the version with numbers go to 11. Now you can have an extra push over the cliff! :D update2: thanks to the feedback I have enlarged a little bit the…
Highly articulated 3d-printable action figure. The SUBSTRATUM PROTOBODY girl is a base figure utilising the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different…
A cool holder for guitar/bass picks NEW DESIGN
A 3D printed strategy board game for up to four players. Game tokens for this model are compatible with Four-in-a-Row . How to Play Players take turns adding two tokens with their assigned color(s) into the board to create chains of their…
The B-52 Stratofortress is an American long-range strategic bomber. The B-52 was put into service in 1955 and has remained in service for over 60 years. The USAF projects that it will serve another 30 years before it is retired. Since its…
This is a remix of the Honeycomb Stratocaster Body by Smadoo which itself is a remix of the Honeycomb Stratocaster Body by Conceptor. The design from Smadoo sadly was to big for my Prusa Mini so I redesigned it to fit my printer and went…
Pins and Tabs used for registration of multi-color relief prints. Print at least two Pins and then as many tabs as you need to do a print run. When printed the tabs should fit tight into the pins. This is by design. Depending on your…
STL-files for you to print two different stratified rock formations. You can scale them up or combine them in your slicer (see screenshot). This gives you endless possibilities for variation.…
This is a Mobius strip with an arrow which can travel around to show you that the Mobius strip is a nonorientable surface. When the arrow comes back to the original location, it's flipped! Read more about (non)-orientable surfaces on…
A highly detailed model of the famous Fender Stratocaster.
A customizable keyring in the style of a EU/UK/GB number plate. These are perfect for labelling your keys, bag and other personal belongings. Use your slicer's 'pause at height' or 'filament change' feature to create multicolored keyrings…
I ran against time to also present this other project: my Fender Stratocaster Squire from the 90's; a iconic, evergreen guitar. I hope you enjoy printing and assembling it; above all I hope it can be printed and assembled well , since I…
Stratocaster pickguard in the HSS pickup configuration. Full size, so I will release a sliced-up one that a printer with a print volume of 220x220 can print at a later time.
I printed in PLA. I would use supports next time.
Create your own customized electric guitar effortlessly with this modular design. Inspired by the original Prusacaster and using the Harley Benton Electric Guitar Kit T-Style from Thomann too, you can easily swap parts to change the…
This is a light remix of the Honeycomb Stratocaster Body by Conceptor. ( https://www.thingiverse.com/thing:3174465 ) I resliced the body into 9 pieces rather than the original 6 so that there is only 1 seam under the strings where the…
Strat-Style 10 Guitar Pick Holder- Holds Up To 1.5mm Picks Keep your favorite guitar picks organized in style! This Strat-style guitar pick holder stores up to 10 standard guitar picks , making it perfect for your desk, studio, practice…
The world-famous US strategic AirForce bomber called the B-52 Stratofortress is borought to you by VualtChaser Settings: Printer: Prusa MK3 Slicer: PrusaSlicer Infill: 5% Retraction: No Nozzle Size: 0.40 Supports: Yes. How to print: To…
Customisable name tag or registration plate keyring. Simply customise, print and attach to your car keys and never worry about remembering your reg, or which keys to pick up, again. I'm fairly experienced in SolidWorks, but new to…
Your printer has to be able to print smooth 1st and 2nd layers. PLA 0.20 mm layer height 2 perimeters At least 15% infill Instructions: Glue the parts together with plastic glue, hot glue, or superglue. If throwing, hold the glider…
Electric Guitar model based on Fender Stratocaster. STL file is more or less 1:1 scale. For printing I've used 0,35 scale factor, in my opinion it give best results. 0.2 layer for body and 0.1 layer is ok. To avoid supports, neck is…
Keychain with registration number, you can edit number with Fusion 360 You can add your text in PrusaSlicer
A Fender Stratocaster Volume/Tone Knob :-) Layer height 0.1 mm for best look. For the MINI knob use paint-on support (see Image) Remove the support with a knife or similar. The MK3S knob needs no support. Printed with PETG. Prusa slicer…
This is not an official model and is probably not super accurate either This is a model of the popular Stratocaster electric guitar made for a school project. Onshape Document:…
This is a set of files revised/updated for the Voronoi 3D-printed Stratocaster body as originally published by @lapwing_3d_prints on Thingiverse: https://www.thingiverse.com/thing:5155017 The original files are pretty great, however,…
Stitched the HSH pick guard back together with TinkerCAD to print on a 350x350 print bed. Will test this weekend.
Recommended to play around with scaling to achieve proper fit. The fit should be snug, however not too tight to damage the card.
Just my design of a Vehicle registration Case (or in Germany "Fahrzeugschein-Schutzhülle"). It fits for the german "Zulassungsbescheinigung/Fahrzeugschein".
Keycaps for Helldivers 2 strategems Inspired by the plaques of Cysterion
Key Features: Corner -mounted or substrate- buried placement Interior viewing access Fish and shrimp hideout filament: PETG This is an original 3D-printed aquarium rock designed to be placed directly against the glass of your fish tank.…
The assassin's teapot: it has 2 chambers, where by closing the inlet hole of one only 1 liquid pours; when closing the other hole the liquid in the second chamber pours. Slice it in a slicer and you will see the separating wall (including…
I found a design to make strategy card holder for TI4 (www.thingiverse.com/thing:3309442), but after printing it found that it had a few flaws. Namely, it used some cards to support others - so once some were gone, others would fall out…
I built this for for a 3D printed Stratocaster build by Toaster117. I bought a DIY Stratocaster kit from Bex Gears because I was going to use everything but the body, unfortunately, the input jack was too big to fit the build. Instead of…
Here´s my lego bass too :D https://www.printables.com/model/213102-lego-minifig-compatible-bass-guitar
Remix of a Stratocaster pickguard modified to be printed in 3 sections with joints to easily connect sections. .stl files for each section are provided, as well as the .f3d file that I used to edit it in fusion 360. I printed sections in…
I included the freecad file so that you can check that the screw hole spacing is correct for your guitar
Stratocaster body to Strandberg Boden. I used https://www.thomann.de/gb/harley_benton_eguitar_kit.htm for the hardware. I also used a 260mm x 80mm x6mm Aluminum plate in the middle to make the body stiffer so I can attach the Tremolo. The…
Building the MK3S+ is great fun - until you get to Step 29, assembling the belt on the Y-axis. Getting the length of the belt right is tricky, but making it worse, the design of the stock Y-belt holder and tensioner sink the nut more than…
Simple wall art / line art decoration
Fender Stratocaster, Dummy 13 edition. I will also upload accompanying hands soon for the neck.
Printed in PLA 15% infill 0.15 layer height
This is a remix of Micahol's Sea of Thieves gunpowder barrel. I've chopped it up for easier printing - you need 2x of Side.stl & 2x Pin.stl to make for easier alignment while gluing, and one of everything else. Stencil.stl is a thin…
Used to lock the registration plate in place, can be customized with the text of your choice. The list itself is 450mm so I cut it in two parts with a dovetail connector in the middle so it can be printed diagonally across most build…
This is a replacement part for the board game trouble/frustration! I printed using 0.2mm layer height and stock PrusaSlicer PLA settings.
Holder for 4 accessories for your Shark Stratos vacuum cleaner.
Took many weeks to design this model. Based off Fender drawings. Perfect replica of a stratocaster with Floyd.
Fender Stratocaster Tremolo cover, perfectly fits my Fender American Stratocaster, should fit any type of Strat (Mexico, Japan, etc…) Customizable: Blank.f3d: Added a Fusion 360 (.f3d) file called blank.f3d so anyone can add a drawing…
Roll up your string of tree lights on this reel. It will reduce the anxiety next year when unraveling the lights. During the unroll this year, the tangled lights brought me anxiety. So, I am going to try this in January and December 2023.…
Check it out- I've designed several one-piece print-in-place TPU check valves- no BB or ball bearings needed, no moving parts to stick or wear out. One-piece elastomer check valves are common enough in the world, but I've never seen…
This is a Fender Stratocaster style body that I created i Rhino from drawings. Once the bod was finished. I then sculpted the skull in ZBrush.
Another silly experiment for the strategy phase
Public domain model of a Fender Stratocaster electric guitar by SSimpossible . Originally uploaded to Blend Swap .
This is a simple but effective drybox which is easy to use. Originally made to sell to customers through Stratum3d.no , but producing many is time consuming. We will continue to make them, but also share the design online. made to hold 3…
This is an drilling guide for Strat necks and neck pockets based on drawings from Warmoth and other sites. It should work without issues on Tele necks and neck pockets too without issue. This drilling guide / template is NOT official and…
Zapraszam do filmu z budowy powiększenia Baterii do kosiarki Briggs&Stratton InStart 775IS… - Jeżeli chciałbyś zapoznać się z tym co robię na YouTube i Facebooku Zapraszam: https://www.magazynowanie-energii.com - Lista wszystkich…
This is my first full blaster design, Stratosphere. It was created after I went to a couple games in urban environments with small flywheel blasters, giving me a much better idea of what I want when it comes to my favorite playstyle of…
Recommended to play around with scaling to achieve proper fit, around 103-105% should be ok. The sign should not be too tight to avoid damaging the strategy card. The two different pieces need to be glued in together.
Filament Type: PLA or PETG Nozzle Size: 0.4 mm Layer Height: 0.1 - 0.2 mm Print Speed: 40 - 60 mm/s Infill: 10-20% (depending on the size and purpose) Nozzle Temperature: 190-210°C (for PLA), 230-250°C (for PETG) Bed Temperature: 50-60°C…
NOT YET PRINTED because I'm waiting on filament but passed orcaslicer's test so it can be printed. Modeled after the renowned Squier Hello Kitty Stratocaster. The pickup hole fits a Fishman Fluence (Agufish inspired). All parts are full…
I designed this for a DIY pickup winder project. This is for a 50mm string spacing. Using 42ga wire I was able to get a resistance of 7k. If you would like to support me: https://ko-fi.com/tinyboatproductions
Highly articulated 3d-printable action figure. The SUBSTRATUM Enid figure is utilizing the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different figures. As the second…
Tired of always going back to the same page? Here's a simple gadget for having the "To Wound" chart on hand. Numbers are clearly visible, so you can just use it without painting it. Includes also the STEP file, just in case you want to…
Update 2025-10-03 : Added text in the matrix that in the mini version the general is the highest rank and can be captured by the spy. _________________________________________________________________________________________________ As a…
Relive the glory of rally racing with this 3D printable STL model of the Lancia Stratos. This legendary rally car model is perfect for motorsport enthusiasts and rally fans looking to display an icon of innovative design and legendary…
A desktop model to demonstrate the Euler angles typically used in aviation (roll/pitch/yaw). For the pins: You need to print 4 of them. The 18mm length is correct for two pins, but you'll need to stretch it vertically for mounting the…
Link to Tinkercad project https://www.tinkercad.com/things/1z1f92oOqi9/edit?sharecode=yHL9wXwKidF7HVuRFtzxVApCed2DniA5pIUE4zTtfOI
Greetings fellow Helldivers, since I found my ability to hit the right buttons in the heat of battle sometimes unworthy of our beloved Super Earth, I designed these keycaps for some of the Strategems which are either most used,…
This is a simple, yet very good Guitar stand. As you can see in the second picture, I designed it to fit that specific Guitar. I designed this stand because I couldnt find a in my opinion fitting Guitar stand on Printables for my Guitar,…
I made a new rig because the other ones were too wide and would risk damaging the wood when polishing with a rotary tool or steel wool. Modelled after a fender strat, fender tele and a squier strat. I suggest printing these in PETG for…
Boeing KC-135 Stratotanker Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Versión para impresión 3d de la Fender Stratacoustic. Guitarra acústica diseñada completamente desde cero en Fusion 360. Se realizó en PLA salvo el refuerzo interior que está realizado en petg al 25% de relleno y 4 paredes. Está pegada…
The guitar body was custom-designed for 3D printing, focusing on structural strength, weight balance, and resonance. Reinforced internal geometry was used to support string tension while maintaining a lightweight build. Printing Process…
A small remix of Josef Edler 's Wall holder for Stratocaster . I made the base bigger and added some brackets at the end of each arm to prevent the guitar from falling. Print Settings Printer: Tevo Tarantula Rafts: No Supports: No…
This model is designed for all strollers with a wheel shaft diameter of 19 mm. For other dimensions, just print the holders in a different scale. Print all 3D parts. Print the PDF file, or edit SVG file for your own text. Cut out the text…
The body consists of 7 parts. Every piece needs glued together. I sanded all the mating faces and used epoxy for plastic, then clamped them and let them dry. I included a file for a pin. 10 of these are needed to link/align the pieces…
Also leaving my quick release behind so I printed a spare. Print 100% solid (really it's not that much material and you want it strong). You need support for the inset, this inset is for an E-clip used to hold the 1/4-20 screw in place so…
New version here https://www.printables.com/model/575252-stone-arch-puzzle-blocks I print on the back of the bridge segments because that gives the blocks a little texture so they don't slide as much. Pieces fit together seamlessly, the…
